Accessories

Home > accessories > Tank Pressure Vacuum Relief Valve

Tank Pressure Vacuum Relief Valve

Tank Pressure Vacuum Relief Valve Tank Pressure Vacuum Relief Valve Tank Pressure Vacuum Relief Valve Tank Pressure Vacuum Relief Valve

PRODUCT CATALOG

Tank Pressure Vacuum Relief Valve Catalog

PRODUCT SPECIFICATIONS

Tank Pressure Vacuum Relief Valve Specifications

Alloy: T304

Sizes: 1.5", 2.00" O.D.

Finish: Polish ID/OD

Pressure: Set at 15 PSI

Vacuum: Set at 0.15 PSI

This Valve has been set at 15 psi (pressure) and 0.15 psi (vacuum) and can not be changed

 

 

Tank Pressure Vacuum Relief Valve

Sanitary Solutions is your Beverage, Brewery, Winery and Tank Industry source for a T304 Tank Pressure Vacuum Relief Valve.

Sanitary Solutions Tank Pressure Vacuum Relief Valves work in the following ways-- From the Vacuum side, when the valve is normally closed and there is vacuum in the tank, the vacuum piston inside the valve opens automatically and draws air into the tank. In return, this keeps the pressure inside and outside the tank balanced. From the Pressure side, when the valve is normally closed and the tank pressure exceeds the rated pressure on the outside of the valve, the valve automatically opens and vents air  to atmosphere.

As for installation of the clamp style Tank Pressure Vacuum Relief Valve, position the valve on the process line and tighten the nut or fasten the clamp according to the fastening system selected and if you are using the clamp style it is recommended to use a clamp gasket and tighten the wing nut of the Heavy Duty Single Pin Clamp to 25 inch pounds of torque.

Note: Since this valve has been set at 15 psi (pressure), any pressure exceeding 15 psi, this valve will open and expel to atmosphere, thus protecting the tank from over pressurizing.

The calibration range is as follows:

Pressure: Set at 15 PSI

Vacuum: Set at 0.15 PSI

This Valve has been set at 15 psi (pressure) and 0.15 psi (vacuum) and can not be changed

Material Test Reports-- Please go to our website marked Material Test reports in the upper right hand corner and put in your heat number to receive a PDF copy of your report--- now that's simple!

When the need arises for a Tank Pressure Vacuum Relief Valve, please call us Toll Free at 1-888-909-3569 or 1-855-640-7871 as we stock the 1.5" Clamp style and can supply you with other sizes depending on the quantity.

Ordering Specifications-- Quantity-- (SSPVRV) Part Number-- Size -- Alloy--